Security
Wear protection outside the basic work is important not only for the use of chainsaws, but also other external devices as well. Use earphones or headphones are designed for outdoor gear noise.
Eye protection is essential if all the cutting equipment. Wear safety goggles that are comfortable and do not obstruct vision. This is the protection of sawdust, wood shavings and other debris.
Arms and legs are also prone to sawdust flying. Wear long sleeves and longPants the use of hand to avoid splinters. Do not avoid using cars in the rain or fog on the ruins of sticking to wet skin and clothing.
The chain
The chain is cross-sectional area of the saw. Skip to the saw, burning or sticking, the chain must be kept sharp. A round file to sharpen the chain every incisive. A dull chain through the forest and more easily than a sharp chain. It is not a straight cut. It 'alsoSit down easily, which can cause injury.
Slack in the chain will jump off the bar and hook easily. Keep the chain tight, but not too hard to cross. A chain that is too tight can snap during use. If you are tight, the chain is not fully addressed, the edge of the bar. Rationalize the use of the regulator and loosen the chain bar.
Oil the chain so that it runs smoothly on the beam. A dry chain starts easily. Oil helps to keep the dust cloggingchain and promotes a clean cut. Use cash to keep the oil on the chain and bar seemed smooth and efficient.
Clean accommodation
The housing of the chain where the chain is always full of sawdust and other residues after prolonged use and repeated. Too much dirt in the chain wheel to rotate more slowly and the chain to be ineffective for cutting. Remove the lid and remove the sawdust to keep the chain saw running in top condition. This prolongs the life ofChainsaw and sharpness of the chain. In addition, work is much easier.
When using chain saws, the operator must observe safety precautions. Following these tips to help protect against the risk of unnecessary injury.
0 comments:
Post a Comment